Nandini Steel stocks stainless steel sheet material from our Mumbai yard, and we have been sourcing this for over 25 years now. Every SS Sheet we hold meets ASTM A240 and ASME SA240 requirements, and we carry the usual austenitic grades, 304, 304L, 316, 316L, 316Ti, 310, 321, 347, and 904L. The chromium, nickel and molybdenum content changes from grade to grade. This determines how a sheet holds up against corrosion or heat, so grade selection matters more than people usually assume.
A stainless steel sheet is basically a flat-rolled product. Fabrication shops use it, cladding jobs use it, and it turns up in a lot of structural and decorative work too. We keep both cold-rolled and hot-rolled sheets in stock, and finishes include 2B, BA (bright annealed), No.4 brushed and No.8 mirror. Standard sizes are 4 ft x 8 ft and 5 ft x 10 ft. Thickness runs from 0.3 mm up to 50 mm, width goes up to 2000 mm, and tensile strength sits somewhere between 485 MPa and 620 MPa depending on the grade you pick. We also keep perforated sheets, chequered patterns and shim stock on the shelf. ISO 9001 covers our quality system, and every dispatch goes out with mill test certificates attached.
If you are buying an ASME SA240 sheet for a pressure vessel or heat exchanger application, you will want chemistry and mechanical data that trace back to the heat number. We only work with mills that provide that traceability. Fabrication houses, EPC contractors, dairy equipment makers and architectural firms across Maharashtra, Gujarat, and nearby states buy from this stock regularly. Sheets go out from Mumbai on scheduled routes, which keeps lead times reasonably predictable even during busy construction months. Common thicknesses stay in ready stock, so most standard-size orders do not wait on a fresh mill run.
Key Features of Stainless Steel Sheets
Excellent Corrosion Resistance: The chromium oxide layer on a stainless steel sheet stops rust and oxidation in marine, chemical and humid conditions.
High Strength: These sheets take mechanical load, pressure changes and repeated stress without deforming, so structural integrity holds up under tough conditions.
Excellent Durability: Pick the right grade, maintain it properly, and these sheets keep performing for decades in industrial and architectural use.
Heat & Temperature Resistance: Grades such as 310 and 321 hold their properties at high temperatures, which suits furnace linings, exhaust systems and heat exchangers.
Good Formability: Sheets bend, roll and press into shape without cracking, though how well depends on the grade and its cold-work condition.
Excellent Weldability: Most ASTM A240 sheet grades take TIG, MIG or spot welding fine, as long as the procedure matches the base metal.
Hygienic Surface: The surface is smooth and non-porous, so bacteria do not build up easily. That is why it is used in food processing and pharma equipment.
Low Maintenance: Corrosion resistance plus an easy-to-wipe surface means less cleaning and no need for repeated protective coating.
Attractive Surface Finish: Mirror, brushed and bright-annealed finishes work for both functional cladding and visible architectural fronts.
Recyclability: Stainless steel keeps its properties even after repeated recycling, which fits into circular manufacturing without any drop in performance.
Packaging, Testing & Delivery
Every batch of ASME SA240 sheet material goes through chemical, mechanical, dimensional and surface checks against the relevant ASTM and ASME standards before it leaves our facility. Material test certificates go out with each shipment, along with any other paperwork the project needs. Sheets are wrapped and bundled with moisture protection and edge guards, since transit damage is the last thing anyone wants after a long haul. Packaging can be adjusted based on what the customer or destination requires, whether that is export crating or standard palletised loads for domestic delivery. Handling stays controlled right through loading and dispatch, so timelines hold and sheets arrive in the condition they left in.
Why Choose Stainless Steel Sheets
A stainless steel sheet does not corrode the way carbon steel does, so it holds up in coastal plants, chemical units and humid storage where ordinary steel would fail within a season or two. It takes mechanical stress and heavy load well, and this is why it turns up in structural framing, tank fabrication and equipment housings that need to last for years. The surface wipes clean without pitting, which is why food processing lines, pharma clean rooms, chemical vessels and dairy equipment rely on it. Certain grades, like 310 and 321, keep their strength even at high operating temperatures, so furnace components and thermal systems use them too. Cutting, bending, forming, machining and welding are all easy with standard shop tools, though the exact approach changes with grade. Finish options run from mirror to matte brushed, covering both architectural cladding and plain industrial panelling. Put corrosion resistance, strength and long service life together, and you get a material that performs reliably in sectors where failure is not an option. Nandini Steel keeps the grades, sizes, thicknesses and finishes that industrial buyers ask for, and every order ships with mill certification.
Our supply chain works through direct mill relationships, not layers of trading, which keeps pricing reasonable on bulk stainless steel sheet orders. Technical questions about grade or finish go straight to our engineering team. Whether you need one test panel or a full container of ASTM A240 Sheet material, our Mumbai stock handles both, with the same documentation and packaging standard either way.
Contact Nandini Steel for a quote on your required grade, thickness and sheet size.
ASTM A240 SS Sheet Price Per Kg
| HS Code | Description | Unit | Per Unit (INR) |
|---|---|---|---|
| 72192219 | NO1/ JT /MILL EDGE FR.PR.SS. 600 MM STAINLESS STEEL SHEETS (HAVING >8%) 6MMX1240MMX6000 | KGS | 73 |
| 72192390 | (HAVING >8%) HOT ROLLED SS WIDE SHEETS 4MMX1240MMX6000 | KGS | 73 |
| 72192219 | 6MMX1500MMX6000 HOT ROLLED STAINLESS STEEL SHEETS | KGS | 73 |
| 72192212 | SS HOT ROLLED SHEETS (HAVING >8%) 6.00MMX1500MMX6000 | KGS | 251 |
| 72199013 | C R STAINLESS STEEL SHEETS PRIME QUALITYSPEC. 1.200MM X 1250MM X 2.500 | KGS | 134 |
Stainless Steel Sheets Specifications
| Parameter | Details |
| Standard | ASTM A240 / ASME SA-240 |
| Grades | 304, 304L, 316, 316L, 316Ti, 310, 321, 347, 904L |
| Thickness | 0.3 mm to 50 mm |
| Width | Up to 2000 mm |
| Length | 2000 mm, 2500 mm, 3000 mm, 6000 mm; custom lengths available |
| Standard Sizes | 4 ft x 8 ft (1220 x 2440 mm), 5 ft x 10 ft (1524 x 3048 mm) |
| Finish | 2B, BA, No.4 Brushed, No.8 Mirror |
| Form | Cold Rolled Sheet, Hot Rolled Sheet, Perforated, Chequered |
| Condition | Annealed |
Stainless Steel Sheets Types
SS Shim Sheets
SS Perforated Sheet
SS Hot Rolled Sheet
SS CR Sheets
Matt PVC SS Sheet
2B SS Sheets
Stainless Steel Sheet Grades
304L is a low‑carbon version of 304 stainless steel. It is easier to weld and reduces carbide buildup, making it suitable for large welded structures.
304L is a low‑carbon version of 304 stainless steel. It is easier to weld and reduces carbide buildup, making it suitable for large welded structures.
316 is a stainless steel with molybdenum that gives excellent resistance to pitting in salty and chemical environments, making it ideal for marine and chemical use.
316L is a low‑carbon 316 stainless steel with improved corrosion resistance after welding, widely used in pharmaceutical, marine, and food processing equipment.
316Ti is a titanium‑stabilised 316 stainless steel that avoids grain‑boundary damage at high temperatures and is ideal for long-term use at elevated temperatures.
310 is a high‑temperature stainless steel with chromium and nickel, offering very good resistance to oxidation (rusting in air) up to 1150°C.
321 is a titanium-stabilised 304 variant, which resists intergranular corrosion after welding, used in exhaust manifolds and heat exchangers.
347 is a niobium-stabilised austenitic stainless steel, which prevents carbide precipitation and is suitable for high-temperature, cyclic heating applications.
904L is a super austenitic stainless steel with high nickel, molybdenum, and copper; excellent resistance to strong acids and pitting.
Stainless Steel Sheets Industrial Applications
Food & Beverage Processing
SS sheets are used in brewing tanks, dairy processing lines, and food preparation surfaces meeting hygiene standards.
Chemical & Petrochemical Industry
316 and 904L Stainless Steel sheets line reactor cladding, acid storage tanks, and heat exchanger panels.
Architecture & Construction
Exterior facades, roofing panels, and wall cladding use No.4 brushed and mirror finish sheets.
Automotive Manufacturing
Exhaust parts, trim panels, and structural reinforcements are stamped from 304 and 430 SS sheets.
Marine & Offshore
Marine-grade stainless steel sheets in 316L and 904L resist saltwater pitting and chloride attack in hull fittings, offshore platforms, and desalination equipment.
Medical & Pharmaceutical
Cleanroom panels, surgical trays, and pharmaceutical vessels rely on low-carbon 316L sheet for purity.
Kitchen Appliances & Home
Food-grade stainless steel sheets in 304 and 430 form sinks, countertops, and appliance housings.
Stainless Steel Sheets Sizes
The available standard sizes of Stainless Steel Sheets are listed in the table given below.
| Parameter | Details |
| Product | Stainless Steel Sheets |
| Standard Sizes | 4 ft x 8 ft (1220 x 2440 mm), 5 ft x 10 ft (1524 x 3048 mm) |
| Thickness Range | 0.3 mm (shim sheets) to 50 mm |
| Example Weight | 16-gauge 304 sheet (4×8) ≈ 45 kg |
| Material Grade Example | 304 Stainless Steel |
| Customization | Cut-to-size available on request |
Distributor of The Following Manufacturers
We are an approved supplier of stainless steel sheet products, distributing high-quality material sourced directly from the following leading mills.
Aperam
Outokumpu
Nippon Steel
JFE Steel Corporation
Stainless Steel Sheet Finish Types
We supply SS sheets in Mumbai, Delhi, Chennai, Kolkata, Bengaluru, Hyderabad, Pune and Ahmedabad and various cities. Ex-stock dispatch within 3 to 5 working days.
| Mumbai (Maharashtra) | Delhi | Bengaluru (Karnataka) | Chennai (Tamil Nadu) |
| Kolkata (West Bengal) | Hyderabad (Telangana) | Ahmedabad (Gujarat) | Pune (Maharashtra) |
| Jaipur (Rajasthan) | Surat (Gujarat) | Chandigarh | Lucknow (Uttar Pradesh) |
| Indore (Madhya Pradesh) | Coimbatore (Tamil Nadu) | Kochi (Kerala) | Visakhapatnam (Andhra Pradesh) |
| Nagpur (Maharashtra) | Patna (Bihar) | Bhopal (Madhya Pradesh) | Vadodara (Gujarat) |
| Mysuru (Karnataka) | Thane (Maharashtra) | Rajkot (Gujarat) | Vijayawada (Andhra Pradesh) |
| Agra (Uttar Pradesh) | Nashik (Maharashtra) | Guwahati (Assam) | Kanpur (Uttar Pradesh) |
| Faridabad (Haryana) | Gurugram (Haryana) | Noida (Uttar Pradesh) | Shimla (Himachal Pradesh) |
| Raipur (Chhattisgarh) | Udaipur (Rajasthan) | Bhubaneswar (Odisha) | Dehradun (Uttarakhand) |
| Ranchi (Jharkhand) | Jamshedpur (Jharkhand) | Chandrapur (Maharashtra) | Dhanbad (Jharkhand) |
| Aligarh (Uttar Pradesh) | Aurangabad (Maharashtra) | Tiruchirappalli (Tamil Nadu) | Srinagar (Jammu & Kashmir) |
| Ludhiana (Punjab) | Warangal (Telangana) | Bikaner (Rajasthan) | Panaji (Goa) |
| Guntur |
Global Supply
| Region | Countries | |||||
| Middle East | Oman, Kuwait, Turkey, Yemen, Syria, Jordan, Cyprus, Saudi Arabia, Iran, Iraq, UAE, Qatar, Bahrain | |||||
| Africa | South Africa, Libya, Egypt, Sudan, Gabon, Nigeria, Algeria, Angola, Equatorial Guinea, The Republic Of Congo | |||||
| North America | Costa Rica, Puerto Rico, Trinidad And Tobago, Jamaica, Bahamas, USA, Canada, Mexico, Panama | |||||
| Europe | Netherlands, Belgium, Greece, Portugal, Hungary, Denmark, Russia, Norway, Germany, France, Italy, UK, Spain, Ukraine, Croatia, Slovenia, Malta, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Czech Republic | |||||
| Asia | India, Japan, Sri Lanka, Maldives, Bangladesh, Myanmar, Taiwan, Cambodia, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea | |||||
| South America | Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, Argentina, Bolivia, Brazil, Chile | |||||
Frequently Asked Questions
What is the price of a Stainless Steel Sheet per kg?
What is the price of a Stainless Steel Sheet 8x4?
A stainless steel sheet 8×4 (8 ft x 4 ft) price starts from Rs 3,000 and goes up to Rs 15,000 per sheet. The final price depends on thickness, grade, and finish.
What sizes do Stainless Steel Sheets come in?
Standard sizes are 4 ft x 8 ft (1220 x 2440 mm) and 5 ft x 10 ft (1524 x 3048 mm) with custom sizes on request. Thickness goes from 0.3 mm to 50 mm.
How much does a 4x8 Stainless Steel Sheet weigh?
A 4×8 stainless steel sheet in 16-gauge (1.5 mm) 304 grade weighs 45 kg. Weight varies by thickness and grade.
What is the difference between 2B and No.4 finish on Stainless Steel Sheets?
2B is a smooth, matte mill finish from cold rolling and annealing. No.4 is a brushed satin finish with visible grit lines. It is preferred for architectural and appliance use.
Which Stainless Steel Sheet grade is best for food processing?
SS 304 and 316L are both food-grade stainless steel sheets. SS 316L is the better choice where chloride exposure or acidic cleaners are a factor.
What is the difference between Stainless Steel Sheets and plates?
Sheets are flat products up to 3 mm (7 gauge) thick. Plates start from 3 mm to 50 mm. Sheets are cold rolled; plates are hot rolled.
Who are the leading Stainless Steel Sheet manufacturers in India?
Nandini Steel is a leading SS sheet dealer and stockist in Mumbai with 25+ years of experience, supplying all major grades from ASTM A240 certified mills.
