ISO 9001:2015 certified stockist & supplier · Since 2003 · Mumbai, India
Home/Products/Round bars
Product · Ex-stock

Round Bars: Stainless Steel, Nickel Alloy & Alloy Steel

Choose the family by service environment first, then the bar standard, the same decision path used for plate and pipe. Each family gets its own hub with grade-level depth. This page just lays out the shared form facts and points you to the right one.

NSReviewed by the Nandini Steel Engineering Team
◆Ex-stock, immediate dispatch
◈MTC EN 10204 3.1 / 3.2
▣To EN 10204 traceable
⬡Mill plate: Aperam · Outokumpu · Jindal
Bundled steel pipe and tube stock strapped in the warehouse, as supplied for Round Bars, Stainless Steel, Nickel Alloy & Alloy Steel
Pipe and tube stock strapped and held ex-stock under crane.

Round bars are solid, round-section long products used as machining and forging stock for shafts, fasteners, valve and pump parts. Nandini supplies them in stainless steel (ASTM A276/A479), alloy steel (ASTM A182 Cr-Mo), Hastelloy (ASTM B574) and Inconel (ASTM B446), in bright and black finish, mill-tested with an EN 10204 3.1 certificate.

Round bars at a glance

  • Four material families: stainless steel, alloy steel, Hastelloy and Inconel. These are the same corrosion-resistant metallurgy we already stock in plate and pipe, just in the machining or forging form.
  • Bar standards by family: stainless falls under ASTM A276 / A479. Cr-Mo alloy steel is ASTM A182. Hastelloy follows ASTM B574, and Inconel follows ASTM B446.
  • Finishes: bright (cold-drawn), black (hot-rolled), peeled and centerless-ground.
  • Traceability: every order ships with an EN 10204 3.1/3.2 mill test certificate, and the heat/cast number is stamped right on the bar.
  • Sourcing: all sizes ex-stock for immediate dispatch; genuine mill material; request a quotation for live pricing.

Round bars by material family

Stainless steel round bars

These austenitic grades, covered by ASTM A276 and A479, include 304, 316, 321, 347, 310 and 316Ti, and they suit general fabrication, marine work, chemical service and hygienic machined parts. Molybdenum gives 316 a pitting resistance that 304 simply doesn't have. 321 and 347, both stabilized, hold up against sensitization at elevated temperature. For the complete lineup, visit the stainless steel round bars hub.

Alloy steel round bars

Chromium-molybdenum bar in grades F5, F9, F11, F22 and P91 is produced to ASTM A182, supplied normalized and tempered so it holds its strength at elevated temperatures. That makes it a natural fit for machining valves, flanges and other pressure parts. Pick the grade according to design temperature and the governing code. For more, check the alloy steel round bars hub, or browse the full alloy steel grades range.

Hastelloy round bars

Ni-Mo-Cr bar to ASTM B574, C22, C276, C2000 and X, for reducing acids and chloride pitting/stress-corrosion-cracking duty. Hastelloy C276 (UNS N10276) resists both reducing acids and chloride-induced pitting. Browse the Hastelloy round bars hub.

Inconel round bars

Ni-Cr-Mo bar made to ASTM B446, B166 and B637, 600, 601, 625 and 718, built for high-temperature work and for service where oxidizing and reducing acids both come into play. Inconel 625 (UNS N06625) stands up to pitting, shrugs off crevice attack, and handles both acid types without trouble. Check out the Inconel round bars hub for more.

Chemical composition: representative grades

One anchor grade per family, typical weight percent, with the balance being iron or nickel unless stated otherwise:

GradeCrNiMoOtherC (max)
304 (S30400)18.0–20.08.0–10.5–Fe balance0.08
316 (S31600)16.0–18.010.0–14.02.0–3.0Fe balance0.08
Inconel 625 (N06625)20.0–23.0≥58.08.0–10.0Nb+Ta 3.15–4.15; Fe ≤5.00.10
Hastelloy C276 (N10276)14.5–16.5balance15.0–17.0W 3.0–4.5; Fe 4.0–7.00.01

Hastelloy C276 and Inconel 625 owe their resistance across both oxidizing and reducing media to high nickel plus molybdenum, with niobium or tungsten also in the mix. 316 gets its edge over 304 in pitting resistance from a simpler source: 2–3% molybdenum.

Mechanical properties (bar, annealed)

Room-temperature minimums in the annealed/solution-annealed condition, per the governing bar standard:

Grade (standard)Tensile, min (MPa)Yield 0.2%, min (MPa)Elongation, min (%)Hardness, max
304 (ASTM A276)51520530201 HBW
316 (ASTM A276)51520530217 HBW
Inconel 625 (ASTM B446, annealed)82741430–
Hastelloy C276 (ASTM B574)69028340–

Physical properties

Density drives bar weight. Austenitic stainless and the nickel alloys stay non-magnetic in the annealed condition.

GradeDensity (g/cm³)Melting range (°C)Magnetic response
3048.01400–1450Non-magnetic (annealed)
3168.01370–1400Non-magnetic (annealed)
Inconel 6258.441290–1350Non-magnetic
Hastelloy C2768.891325–1370Non-magnetic

Equivalent designations

GradeUNSWerkstoff (WNr)
304S304001.4301
316S316001.4401
Inconel 625N066252.4856
Hastelloy C276N102762.4819

Sizes, finishes & standard lengths

Round bar comes in a wide range of diameters, and we offer it in four finishes, each chosen based on how the bar will actually be used.

FinishProcessTypical useTolerance class
Black barHot-rolled, as-rolled surfaceForging/upset stock; heavy machining with cleanup allowanceMill tolerance
Bright barCold-drawnClose-tolerance machining, fastener and stud stockh9 / h11
PeeledTurned/peeled from black barLarger diameters needing a clean, concentric surfaceh9 / h11
Centerless-groundGround to finished sizeShafts, pins and valve stems machined close to sizeh9 and tighter

When working from black bar, leave machining allowance for the as-rolled surface and any decarburized layer. Cold-drawn bright or ground bar cuts that allowance down and holds diameter to h9/h11.

All diameters and lengths sit ex-stock, ready for immediate dispatch. Send a quotation request with your diameter, finish and length, and we can arrange cut-to-length or peeled-to-size.

Round bar weight: chart & formula

Bar weight is a function of diameter and material density. Use:

kg/m = 0.785 × D²(mm) × ρ(g/cm³) ÷ 1000

Ø20 mm, 316 bar, worked out: 0.785 × 400 × 8.0 ÷ 1000 ≈ 2.51 kg/m.

DiameterGrade (ρ)Weight (kg/m)
Ø20 mm316 (8.0)2.51
Ø25 mm304 (8.0)3.93
Ø40 mm316 (8.0)10.05
Ø50 mmInconel 625 (8.44)16.56
Ø50 mmHastelloy C276 (8.89)17.45

Our weight calculator runs the same formula across grades and sections, and so does the how-to guide on steel weight.

Standards & specifications

The governing bar standard is set by the material family:

Stainless steel: ASTM A276 covers hot- and cold-finished bar, while ASTM A479 is the one to pick for pressure-retaining components. A479 carries the ASME-referenced requirements that A276 simply doesn't.

  • Cr-Mo alloy steel: ASTM A182 (forged/rolled bar), supplied normalized and tempered.
  • Hastelloy (Ni-Mo-Cr): ASTM B574.
  • Inconel (Ni-Cr-Mo): ASTM B446, with B166 and B637 for related product forms.

Traceability to these standards is documented on the EN 10204 3.1 mill test certificate that comes with every order.

Testing, inspection & certification

Every bar ships with an EN 10204 3.1/3.2 mill test certificate showing heat chemistry and mechanical results checked against the ordered standard. The heat/cast number carries over from the certificate to the stamped bar, so full material traceability is built in. On request, we can also supply:

  • PMI (positive material identification) to confirm grade on the physical bar.
  • Intergranular corrosion testing to ASTM A262 for stainless bar, to verify freedom from sensitization.
  • Ultrasonic testing (UT) for larger-diameter and forging stock.

For stainless grades held or welded between 425 and 815 °C, call for an L grade or a stabilized grade, along with solution annealing, to head off sensitization. Our testing, MTC, NDT & PMI overview lays out how each check gets reported. See solution annealing and intergranular corrosion sensitization for more detail.

Applications

  • Machined components, valve and pump parts, shafts, pins, valve stems and pump internals turned from ground or bright bar.
  • Fasteners and stud stock, studs, bolts and threaded bar; see our fasteners range.
  • Forging and upset stock, black or peeled bar as input for forged flanges and fittings.

Frequently asked questions

What sizes do round bars come in?
Round bar comes in bright (cold-drawn), black (hot-rolled), peeled and centerless-ground finishes, across a wide diameter range, in standard mill lengths. Cold-drawn and ground bar hold close h9/h11 tolerances for machining. Black bar, on the other hand, is sized for forging and heavy cutting. Send us your diameter, finish and length and we'll get you an ex-stock quote.
How do I calculate round bar weight per meter?
Use kg/m = 0.785 × D²(mm) × ρ(g/cm³) ÷ 1000, where D stands for diameter and ρ for material density. Take a Ø20 mm 316 bar with ρ at 8.0: 0.785 × 400 × 8.0 ÷ 1000 works out to about 2.51 kg/m. Nickel alloys weigh more, simply because they're denser. Inconel 625 comes in at 8.44, and Hastelloy C276 hits 8.89.
What is the difference between bright bar and black bar?
Black bar comes hot-rolled, with an as-rolled surface and mill tolerance. It's meant for forging and heavy machining, where you've got cleanup allowance to work with. Bright bar is different: cold-drawn to a clean surface, held to close h9/h11 tolerance. That makes it the choice for fastener stock and close-tolerance machining. Peeled and centerless-ground bar deliver a concentric finished surface, suited to shafts and stems.
Which ASTM standard applies to my round bar?
Material family drives the spec: ASTM A276/A479 covers stainless steel, A182 handles Cr-Mo alloy steel, B574 applies to Hastelloy, and B446 covers Inconel. For pressure-retaining stainless parts, go with A479 rather than A276. Each bar comes with an EN 10204 3.1/3.2 mill test certificate that confirms conformance.

Request a quotation

Nandini Steel keeps all four families ex-stock, ready for immediate dispatch, and every order comes from genuine mill material with an EN 10204 3.1/3.2 mill test certificate. With 20+ years of history dating back to 2003, 307+ projects completed, 260+ clients served and 36+ export countries reached, the company holds ISO 9001:2015 certification as a stockist and supplier.

Send your grade, diameter, finish, length and quantity for live pricing. Call +91 22 43404600, WhatsApp +91 99202 09184, or email reachus@nandinisteel.com.

Related grades to cross-shop

Need this grade matched to your service?

Send your spec, our engineering team confirms the grade, stock and certification, ex-stock from Mumbai.

Request a quoteWhatsApp us